Delta Electronics Ethernet Extension Module DOP Spécifications télécharger pdf (Page 105)

Train ing Kit O peratio n Manua l

4-1 0

 An equivalent CANopen network is shown below.

 The HMI displays the devices which are involved in data exchange.

HMI

Reading the temperature sent

by channels 1 in DVP04PT-S

D6032

Setting the frequency of

pulses sent by DVP28SV2

D6282

Setting the number of pulses

sent by DVP28SV2

D6284

High-speed count

D6033

Pulse output flag

Count clearing flag

2. The steps of setting the HMI are as follows.

Step 1: Set the frequency of pulses sent by DVP28SV2, and the number of pulses sent by

DVP28SV2

Step 2: Press the Pulse output button so that the state of the button is RUN.

Step 3: Press the Remove count value button so that the state of the button is ON. The state of

the Pulse output button becomes STOP. If users want to resume the output of pulses,

they have to set the Remove count value button to OFF, otherwise the Pulse output

button can not be set to RUN.

Note: When pulses are sent, users can set the frequency of pulses sent by DVP28SV2, but they

can not change the number of pulses sent by DVP28SV2.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 174 175

Pas de commentaire

Delta Electronics Ethernet Extension Module DOP Spécifications Page 105