Delta Electronics Network Device VFD-S Spécifications télécharger pdf (Page 28)

VFD-S Series

5-1

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS

5.1 Group 0: User Parameters

0 - 00 Identity Code of AC Drive Factory setting: d#

Settings None

1/4 1/2 1 2 3

115V/230V d0 d2 d4 d6 d8

460V -- -- -- d3 d5 d7 d9

 This parameter shows the capacity of the AC drive. Users can read Pr.0-01 to check if it

is the rated current of the AC drive corresponds to the identity code shown above and the

current shown below.

1/4 1/2 1 2 3

115V/230V 1.6A 2.5A 4.2A 7.5A 11.0A

460V -- -- -- 1.5 A 2.5 A 4.2 A 5.5 A

0 - 01 Rated Current Display of the AC drive Factory Setting: d ##.#

Settings None Unit: 0.1A

 This parameter displays the rated current of the AC drive. It will display based on Pr.0-00,

and is read-only.

0 - 02 Parameter Reset Factory Setting: d 0

Settings d 0 to d 9 Not used

d 10 All parameters are reset to initial factory settings

 This setting allows the user to return all parameters to the factory default settings.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 142 143

Pas de commentaire

Delta Electronics Network Device VFD-S Spécifications Page 28