Delta Electronics Network Device VFD-S Spécifications télécharger pdf (Page 21)

VFD-S Series

5-4

0 - 08

Jelszó beállítása – megváltoztatása

Alap beállítás: d 0

Beállítások d 0 - d 999 lépték: 1

! For a password to be configured, the non-zero value assigned to Pr.0-08 must be entered

twice. In other words, set the value of Pr.0-08 to the desired value and press the

Prog/Data key. Then, press the Prog/Data key again to display the value of Pr.0-08.

Finally, press the Prog/Data key again to store the displayed value, which then becomes

the password.

For example, say that Pr.0-08 is set to 111. When the AC drive is powered-up, all the

parameters will be locked and their values cannot be changed. To permit the values of

parameters to be altered, navigate to Pr.0-07 and change its value to 111 (the password

configured in Pr.0-08). Then press the Prog/Data key, and you may alter the parameter

values.

! Kijelző állapotai:

d 0: nincs jelszó

d 1: jelszó beállítva

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 129 130

Pas de commentaire

Delta Electronics Network Device VFD-S Spécifications Page 21