Delta Electronics GBIC Interface Converters GBIC-1250B5QR Guide de l'utilisateur télécharger pdf (Page 13)

Fabric Watch User’s Guide 2-1

Chapter

Using Fabric Watch

This chapter provides the following information:

• Overview on page 2-1

• User Interfaces on page 2-1

• Profiles on page 2-2

• Classes on page 2-3

• Threshold Naming Conventions on page 2-7

• Events on page 2-7

• Alarms on page 2-8

• Configuring Thresholds and Alarms on page 2-9

Overview

Fabric Watch provides the following information about each out-of-boundary condition discovered:

• Name of threshold

• Current value of element counter

• Unit of measurement (for example, degrees Celsius, RPM, or unit of time)

• Time base for counter, used to compute rate of change (for example, events per minute)

• Historical information about the last alarmed event generated

User Interfaces

Use either Web Tools, telnet interface, an SNMP-based enterprise manager, or the configuration

file to view and modify Fabric Watch settings.

Web Tools

Through Web Tools, you can:

• View fabric and switch events through the fabric-wide Event View.

• View and modify threshold and alarm configurations through the Fabric Watch View.

• Upload and download the configuration file through the Config Admin tab in the Switch

Admin window.

Refer to the Web Tools User’s Guide for information on using Web Tools.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Pas de commentaire

Delta Electronics GBIC Interface Converters GBIC-1250B5QR Guide de l'utilisateur Page 13