Delta-electronics DeviceNet Slave Communication Module DVPDT02-H2 Manuel d'utilisateur télécharger pdf (Page 15)

DeviceNet Slave Communication Module DVPDT02-H2

DVP-PLC Application Manual

9. Confirm the I/O data of DVPDT02-H2 node.

Item Explanation Default

Address Node address of DVPDT02-H2 on DeviceNet network N/A

Name Name of the node N/A

Vendor ID 799 is the vendor ID of Delta Electronics, Inc. 799

Device Type Device type of DVPDT02-H2. 12 refers to communication adapter 12

Product Code Product code of DVPDT02-H2 83

Major Rev. Major version of DVPDT02-H2's firmware 1

Node

information

Min Rev. Minor version of DVPDT02-H2’s firmware 1

Polled Setting One of standard DeviceNet I/O transmission methods Supported

Bit-Strobe Setting

One of standard DeviceNet I/O transmission methods.

DVPDT02-H2 does not support this.

N/A

COS/CC Setting

One of standard DeviceNet I/O transmission methods.

DVPDT02-H2 does not support this.

N/A

Input Size Length of data transmitted from DVPDT02-H2 to DeviceNet master 32 bytes

Output Size Length of data transmitted from DeviceNet master to DVPDT02-H2 32 bytes

10. Confirm all the settings are correct and click on “OK”.

 Configuration of DVPDNET-SL

1. Double click on DNET Scanner (node 01), and the "Scan Module Configuration…” dialog box will appear.

You can find the currently available node, DVPDT02-H2, in the list. On the right hand side, there is an

empty “Scan List”.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Pas de commentaire

Delta-electronics DeviceNet Slave Communication Module DVPDT02-H2 Manuel d'utilisateur Page 15