Delta Electronics DVPDNET-SL Manuel d'utilisateur télécharger pdf (Page 10)

DeviceNet Network Scanner DVPDNET-SL

DVP-PLC Application Manual

 Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN

rail.

 Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail,

as shown below.

DVPDNET

35mm DIN rail

DVP28SV

RUN

STOP

3.3 Connecting to DeviceNet Connection Port

 The colors on the PINs on the DeviceNet connection port match the colors of the connection cables.

Make sure you connect the cable to the right PIN.

 We recommend you also apply Delta’s power module in the connection.

4 Configuration

4.1 Corresponding Relation between DVPDNET-SL and DVP-SV

After all DVPDNET-SL are connected to DVP-SV, DVP-SV will distribute data mapping areas to every

DVPDNET-SL.

DVPDNET DVP28SV

RUN

STOP

DVPDNETDVPDNETDVPDNETDVPDNETDVPDNETDVPDNETDVPDNET

The index of DVPDNET-SL is its number. The first DVPDNET-SL on the left hand side of DVP-SV is No. 1,

the following DVPDNET-SL modules are No.2, No.3, No.4 and so on.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Delta Electronics DVPDNET-SL Manuel d'utilisateur Page 10