Delta Electronics A80 Instructions d'exploitation télécharger pdf (Page 13)

1. 2. 3. 4.

Caution

Whenassembling thedriveataheightoflessthan2.50m, theyellowboltsmustbesecuredwiththe

enclosed screws.

Closing the limit switch

Take the screws which were previously removed or the screws in the housing cover and carry out steps 1 - 6 shown below.

Note

Make sure that the seal and the lining groove are clean and that the cover is properly positioned.

Tighten the screws carefully.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Delta Electronics A80 Instructions d'exploitation Page 13