Delta Electronics TP04 Manuel d'utilisateur télécharger pdf (Page 43)

Chapter 1 TPEdit Operation

1-42

Step 1. The setting steps are the same as ON/OFF button. There are some setting

items are different in the dialog box.

Step 2. The value length could be set to 16 bits or 32 bits. Value type could be

unsigned , signed, hexadecimal and BCD.

Step 3. If you set 3 for integer number and 2 for decimal number, the whole number

will be displayed as 000.00. If you set 5000 for the maximum value, the

maximum you could input is 050.00 due to there are 2 decimals. If you set

500 for the maximum value, the maximum you could input is 5.00.

Step 4. After finishing input, press OK to enter and the button will be used by the

function you set.

Constant: Pressing this button and TP will send the constant setting to PLC

corresponding register.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Pas de commentaire

Delta Electronics TP04 Manuel d'utilisateur Page 43