Delta-electronics DeviceNet CME-DN01 Manuel d'utilisateur télécharger pdf (Page 6)

Chapter 1 Preface| CME-DN01

1-2 Revision October 2007, 2006PDD23000003

1.3 Features



The communications adapter device acts as a gateway from DeviceNet network to

MODBUS network.



Install on the AC drives directly.



Defined as a DeviceNet Communications Device Profile 12 (0xC).



There are 8 I/O addresses used to control the length by setting. The I/O mapping

address can be set by the DeviceNet manage software system, such as RSNetWorx®

from Rockwell. By this way, user can monitor the VFD series by the ladder diagram,

such as RSLogix 500® from Rockwell, and send commands to VFD series.



No external power needed. Power is supplied via RS-485 that is connected to VFD

series. Eight pins RJ-45 cable, which is packed together with CME-DN01, is used to

connect RS-485 of VFD series to RS-485 of CME-DN01 for power. CME-DN01 starts

operation once the connection finished.



DeviceNet Group2 slave functionality includes:

 Explicit connection

 Polled connection



Object Model

1 2 3 4 5 6 7 8 9 10 11 ... 37 38

Pas de commentaire

Delta-electronics DeviceNet CME-DN01 Manuel d'utilisateur Page 6